ANTALYA ROOF INSULATION
roof insulation It is too serious an application to be left to chance. To protect against rain and snow water in buildingsroof insulation is a must. In addition to using quality insulation material, workmanship is much more important. No matter how high quality materials are used, if the workmanship is not sound, unfortunately the application will always result in disappointment.
Due to faulty workmanship from the very beginning, subsequent repairsroof insulation repair costs increase considerably. In short, great care should be taken in choosing the company and master who will carry out the application.
Roof Insulation Expert and Material Selection
10 yearsroof insulation In my experience many people get waterroof repair I did. Most of them were due to mastery errors. In some of them, the workmanship was done well, but this time a problem occurred because the material was not of high quality. Therefore, quality material + workmanship The duo should be given utmost care. Definitely the best on the marketmaterial There is no requirement that it should be used, a medium quality material can offer definitive solutions when applied with quality workmanship. The quality of the material to be used, the applicationto the roof It varies depending on. For example, it will be used for a sloping roof and terrace roofs.material quality varies.
The Most Commonly Used Materials in Roof Insulation
- Membrane
Membrane, also known as shingle among the public, is a bitumen-based material most commonly used in roof insulation. It is bonded with fire. There are polyester felt, glass tulle, 2 mm, 3 mm and 4 mm thickness options. The most commonly used one in the market is 3mm and polyester felt. It is widely used in concrete roofs, osb tops, terrace roofs, foundation and curtain insulation. No matter how good the quality is, if it is applied incorrectly, it will not give good results. Especially the repair of the parts under the soil and concrete is very costly, so care should be taken in choosing the master who will perform the application.
- Slate
Slate, It is a bitumen-based insulation material, also colloquially called shingle, colored by sprinkling sand on the membrane, and is the most widely used in roof insulation. As with the membrane, the slate is bonded by fire. Generally, the 4mm thick and red color one is widely used in the market.
Colors
There are also white, green, grey, black and blue colored ones. It is used on concrete roofs, OSB and terrace roofs.
APPLICATION
It is adhered to the membrane for protection purposes. Although it can be used alone as a waterproofing material on sloping roofs, the area where the application is made begins to receive water as openings will occur in the joints in the future. Using it alone as a waterproofing material on terrace roofs and flat areas does not provide any benefit to waterproofing and creates unnecessary time and money costs. That's why applying it on the membrane always gives better results. It can be applied as a single layer without a membrane in sloping areas and when temporary waterproofing is required. If the poor quality one is chosen, blackening will occur on the surface during application and this will not create a pleasant appearance. In addition, in poor quality ones, shortening occurs over time due to natural conditions, and as a result, openings occur in the joints. It will implementroof insulation The selection of the master should be at least as meticulous as the selection of materials.
- OSB Sheet
OSB is bonded by pressing wood particles together with glue or another adhesive. is created. Its dimensions are 122cmx244cm. Its thickness varies between 8-18 mm. It is not resistant to water, but can be made at least partially durable by painting. It has a chance of getting wet once under rain, but the second time it gets wet, it swells and swells and becomes unusable.
APPLICATION
When applying to roofs, care should be taken to avoid water accumulation on the roof surface. If the application is made while there are puddles of water, it will be affected by the evaporating water and the roof will start to look like waves. This situation is especially encountered during the winter months. If the application must be made while there is standing water, roof ventilation must be installed.
Scope of application
Building roof coverings, store decoration, packaging industry,
It is used in wall coverings, under siding, floor coverings, etc.
- Shingle, Shingle, Quick Shingle
Quick Shingle
Shingle, It is a roof insulation material consisting of separate pieces and laid on top of each other. It can be nailed with its own special nail on roofs with a sufficient slope. On less sloping roofs, it should be glued and applied with fire, otherwise water leakage may occur from the nail bottoms.
Shingle Types
Dragon, Clover, Honeycomb, Round, Quick Jingle
Method of Application
Shingles are laid one by one in the form of leaves, adding a different aesthetic to the roof.
If the lower parts of the leaves are not glued very well, they will break off in stormy weather and this will cause the aesthetics of the roof to deteriorate. This situation is most commonly observed in camellias, pergolas and porches. Since the leaves of the parts coming to the forehead are not glued well, breakage occurs. If possible, shingles should not be applied to the forehead.
Quick Shingle
For Quick Shingle, we can call it shingle patterned slate. Jingle patterns are engraved on the slate during the production phase, and during application, the application is made by sticking fire to the membrane and slate. As a result of the application, a shingle appearance is obtained.
REFERENCES
 |  |  |
|---|---|---|
 |  |  |
 |
SERVICE AREAS
-
Antalya
-
Muratpasa
-
Konyaalti
-
Lara
-
Kepez
-
Aksu
-
Dosemealti
-
If we exist
-
Belt
-
serik
-
Manavgat
-
Alanya
-
Goynuk
-
Beldibi
-
Apple
-
Korkuteli
-
Gebiz
-
Gazipasa